Oxygen Regulator

Browse Oxygen Regulator wholesalers, exporters, manufacturers, dealers & suppliers.

Borewell Submersible Pumps

Get Verified Sellers Of Borewell Submersible Pumps

Industrial Oxygen Cylinder

Get Verified Sellers Of Industrial Oxygen Cylinder

Portable Oxygen Can

Get Verified Sellers Of Portable Oxygen Can

Aluminium Oxygen Cylinder

Get Verified Sellers Of Aluminium Oxygen Cylinder

Carbon Composite Cylinders

Get Verified Sellers Of Carbon Composite Cylinders

Oxygen Regulator:

Oxygen Regulator is the pressure reducing device of the cylinder gas maintain the constant gas flows to a workable level for operating equipment and instruments. Oxygen regulators are used in oxygen cylinders to regulate the flow of oxygen.

Some facts about Oxygen Regulator:


  • The flow of gas can be controlled when the import pressure and export flow changes. It can be ensured that its export pressure remains stable.
  • Potential hazards and pitfalls are indicated by the rise in low-pressure meter readings.
  • Compressed or liquid oxygen from an oxygen tank is released by the oxygen regulator in a continuous mode that can be  measured in liters per minute (LPM).
  • A knob device that can adjust the flow of oxygen through the regulator can be used to adjust the oxygen regulator.
  • Single stage and double stage are mainly two types of regulators available. Both single and double stage regulators are of diffrent types are available to meet the requirement in an industry or at your workplace.
  • The output of oxygen regulators can be adjusted from 0 to 25 liters per minute, depending on your requirement.
  • A higher oxygen flow of 15 liters per minute can be achieved by Industrial oxygen regulators.
  • The pressure can be reduced in one step to generate pressure within a specified range in case of a Single stage Regulators. An insignificant variation in delivery pressure will be displayed by the single stage regulator as the cylinder pressure decreases when in use. Therefore, these regulators are used in which a constant outlet pressure is not necessary.
  • The delivery pressure remains constant as the cylinder pressure decreases in case of a Dual stage Regulators. However, the same function is performed by a dual stage Regulator as single stage regulators. Heightened accuracy pressure control is maintained as the reduction of pressure is achieved in two steps. Therefore, these regulators are used for applications that require a constant outlet pressure for the life of an oxygen cylinder.
  • The speed must be slowed down when the oxygen cylinder is deflated or the oxygen regulator is opened as the temperature of the working part of the oxygen regulator is greatly increased if the valve opening speed is too fast. This can happen due to the adiabatic compression, which may burn or damage the parts made of organic materials and the oxygen regulator can be completely burned out. It can also cause ignition and burn out the pressure reducer parts due to the discharge of too fast electrostatic spark and pressure reducer has oil.
  • The valve of the gas cylinder should be slightly opened before installing the medical regulator to blow off the dirt to prevent dust and moisture from entering the medical gas regulator.
  • The gas outlet of the cylinder valve must not be aimed at the operator or others when the cylinder valve is opened so that the high pressure gas can be prevented from bursting out and hurting people.
  • The gas rubber pipe joint and the exhaust port of the pressure reducer must be tightened with the wire or clamp that has been degassed.
  • Care must be taken to prevent the threaded joints of the pipe joints from slipping during the loading and unloading of the oxygen regulator to prevent the screws from being thrown out of position.
  • The pressure value of the working pressure gauge must be observed during the working process.
  • The pressure regulator screw of the pressure reducer should be loosen, the oxygen cylinder valve is then closed and the gas in the pressure reducer will be slowly exhausted while stopping the work. The spring and the pressure reduction valve can be protected from damage in this way.
  • The oxygen regulator can be removed from the cylinder after the work is completed.
  • Usually, Oxygen Regulators have Right hand Threads and do not have the cuts on the Hexagon when used for non combustible gases such as Oxygen, Argon, Co2 etc..
  • Regular repairing of the oxygen regulator and periodic inspection of the pressure gauge must be done to ensure the reliability of the pressure regulator and the accuracy of the pressure gauge readings.
  • Oxygen regulator should be repaired in time if there is a leak in the oxygen regulator and the pressure gauge is not working properly when in use.
  • An oxygen cylinder should never be used without a functioning regulator that fits properly with the cylinder valve.
  • Always keep valves closed when the tank is not in use, even if the tank is empty.
  • Never put any adhesive tape around the cylinder neck, oxygen vale or regulator assembly as it can hamper oxygen delivery.
  • Oxygen regulator should never be used for other gases as cross-contamination of internal parts especially with grease or oil could cause rapid oxidation and fire.
  • The regulator unit can be sliped over the top of the oxygen cylinder to align the pins. You can slip the wrench over the top of the cylinder, turn counterclockwise to register pressure. The oxygen tube and nasal cannula can be connected to the oxygen outlet on the regulator and then the oxygen can be set to the prescribed flow rate with the help of the flow control knob.

Installion and Operation of Oxygen Regulator:


  • The plastic cover should be removed from cylinder neck.
  • Presence of a washer on the largest pin of the regulator should be ensured.
  • The regulator should be attached by sliding it onto the cylinder neck until three pins line up with three holes on the cylinder.
  • The screw on the regulator should be tighten.
  • Cylinder should be opened by turning valve counterclockwise until pressure gauge on regulator indicates the amount of oxygen in the tank.
  • Tubing and nasal cannula should be connected securely to the nipple on the regulator.
  • The flow setting should be set to your prescribed setting by turning the knob on the regulator.
  • The contents gauge should be periodically checked while in use.
  • The cylinder valve should be closed before removing regulator. The remaining oxygen should be bleed off before removing the regulator which can sometimes create a load hissing noise.
  • The flow knob can be turned on again after the cylinder valve is closed to release the remaining oxygen. The flow knob should be turned off before removing the regulator.

Use Getatoz to find the best Oxygen Regulator suppliers for your need. We've helped thousands of businesses choose the right Oxygen Regulator suppliers, stockists, distributors, super stockists & sub stockists.

Use Getatoz to find Oxygen Regulator buyer & importers from India & abroad.

Oxygen Regulator Suppliers Across World

Browse Oxygen Regulator suppliers across the globe including Guernsey, Guatemala, Comoros, Saint Kitts and Nevis, Albania, Jordan, Moldova, Bolivia, South Africa, Cuba, Anguilla, Guyana, French Southern territories, Rwanda, Serbia, Brazil, Sierra Leone, United States, Lithuania, El Salvador, Timor-Leste, Costa Rica, Russian Federation, Canada, Venezuela, South Sudan, The Democratic Republic of Congo, Trinidad and Tobago, Slovakia, Lebanon, French Polynesia, Cape Verde, Eritrea, Norfolk Island, Austria, Kuwait, Germany, Burundi, South Korea, Malaysia, Hungary, Uruguay, Dominican Republic, Hong Kong, Svalbard and Jan Mayen, Tajikistan, North Macedonia, United Arab Emirates, Botswana, Vanuatu and other localities of World as well..

How can Getatoz help in getting the best Oxygen Regulator Wholesalers near you?

You can browse Oxygen Regulator Wholesalers on the basis of your location. Submit your requirement and suppliers will contact you with their best price offers for Oxygen Regulator. Getatoz have some of the Best Oxygen Regulator Suppliers of 2021